URBI R/C Interface Canon/Nikon
|
Our small USB controller lets you use most Nikon or Canon digital cameras for Remote Controlled or automated Aerial Photography.
|
The URBI connects to the USB port on the camera and takes input from the R/C receiver in the aircraft. When triggered by the R/C equipment, it will instruct the camera to take photographs.
The interface has various settings which can be changed 'in the field' and retained when power is removed. Setup is performed using a push button on the interface with 2 LED indicators.
- Canon AE mode can be selected from Auto,P,Tv,Av & M.
- Number of shots per trigger can be set 1-9
- TTL trigger input can be enabled for connection to a UAV autopilot or other circuit that can produce a 3.3v-5v pulse.
- Intervalometer - timer based trigger can be set to release shutter 1-99 seconds.
This unique interface is designed and manufactured by us, with many hundreds in use globally. If R/C camera control is required, then you are looking at the #1 solution.
Developed to provide reliable camera control for hobbyists and professional applications, usage is straightforward. The connection to the R/C receiver provides power to the interface. The connection to the camera is via a normal USB cable, so there are no special connectors or wiring required. This version can be upgraded to control Zoom by purchasing a DUAL INPUT cable.
|
Camera Compatibility
Intelligent driver software detects the type of camera connected and adapts at start up - there is one version of the software, and it works with all the suitable cameras from Canon and Nikon. This is not limited to the list below, but these are the more common cameras we support. If your Canon or Nikon camera is not listed, check here first, or you can email us for more details.
FULLY Tested with the following
Canon Powershot G5, G6, G7, G9
Canon PowerShot A310, A510, A620, A640
Canon PowerShot S80
Canon PowerShot S2is, S3is, S5is
Canon Digital IXUS 400-S400 Note other IXUS/IXY models do not provide remote control.
Canon SLR 350D, 400D
Nikon - Almost every recent Nikon, including SLR will support shutter control with this interface. The new Nikon S640 does not work however.
Further Details:
Example Usage
URBI FAQ
Camera Compatibility Chart
Dimensions = 40mm x 55mm x 12mm / 2.5"x1.5"
Weight:
- Circuit Board: 12g
- With dual servo cables and USB cable 32g
Power: less than 80mA @ (4.8V - 6.0V).
USB Connector: Standard USB A Female.
RC/Connector: JR/Futaba Style.
ROM: Ugradable via USB connection to a PC, (cable included).
Warranty: 90 Days
|
Price: (USD)
$112.50
|
Shipping from:
$1.76
|
On Backorder.
Available very soon!
|
|
|
|
|
|
|
|
|
|